押庄龙虎

     ȵ    ͹ ¯

contact us

Phone: 0515-88629188
Mobile: 189-2189-8916

Fax: 0515-88602966

Q Q: 2016138246

Email: jsxinlongjt@163.com

Website: lix1010.cn


Electric heating oil furnace

300KW thermal oil furnace

300KW导热油炉
Detailed introduction

产品介绍


 


300KW导热油炉


Electric heating oil furnace The heating machine unit (heating tube, high temperature oil pump, filter), expansion tank, and electrical control cabinet are connected as a complete set of equipment to the customer's heating equipment. The user only needs to access the power supply, the inlet and outlet pipes of the medium, and some The electrical interface is ready for use.

Its working principle: The electric heating oil furnace uses electricity as the energy source, inserts the heating element directly into the organic carrier (thermal oil) and directly adds it, using a high-temperature circulation pump to force the high-temperature heat-conducting oil to circulate in the liquid phase and transfer heat to the One or more heat-using equipment. After the heat-using equipment, it passes through the circulating pump again, returns to the heater, and then absorbs the heat and transfers it to the heat-using equipment. In this way, the continuous heat transfer is achieved to increase the temperature of the heated object. To meet the heating process requirements.

Thermal oil heater adopts digital display temperature controller to control temperature. It has over temperature alarm, low oil level alarm and over pressure alarm function. It is a kind of chemical, petroleum, machinery, printing and dyeing, food, shipbuilding, textile, film and other industries. Energy-efficient heating equipment.

 

江苏鑫龙化纤机械有限公司

 

江苏鑫龙化纤机械有限公司


江苏鑫龙化纤机械有限公司


江苏鑫龙化纤机械有限公司


江苏鑫龙化纤机械有限公司


1. Petroleum and chemical industry: polymerization, condensation, distillation, melting, dehydration, forced insulation, etc .;

2. Wood industry: plywood, fiberboard pressure forming, laminate heating, hot plate heating, oil press temperature control, wood drying, etc

3. Oil industry: fatty acid distillation, oil decomposition, concentration, esterification, vacuum odor and other reaction kettle temperature control, reaction kettle heating, etc.

4. Plastic and rubber industry: hot pressing, calendaring, extrusion, vulcanization, etc.

5. Synthetic fiber industry: polymerization, melting, spinning, stretching, drying, etc.

6. Textile printing and dyeing work: heat setting roller heating, drying room heating, heat capacity dyeing, etc.

7. Non-woven industry: non-woven fabrics, etc.

8. Feed industry: drying, etc.

9, paper industry: drying, corrugated paper processing, etc.

10. Building materials industry: gypsum board drying, asphalt heating, concrete component maintenance, etc .;

11. Machinery industry: painting, printing and drying;

12. Food industry: drying and heating.

 

江苏鑫龙化纤机械有限公司


1. With advanced and complete operation control and safety monitoring device, the heating process is fully controlled, easy to operate and easy to install.

2. Can get higher working temperature (≤340 ℃) under lower operating pressure (<0.5MPA). When the oil temperature is 300 ℃, the operating pressure is only 70% of the saturated steam pressure of water First, the thermal efficiency can be as high as 95% or more.

3. Stable heating and precise temperature adjustment, temperature control accuracy can reach ± 1 ℃. Non-steam boilers run, run, drip, leak and other heat losses, heat utilization rate of 95%, energy saving of about 50%.

4. The equipment is small in size and flexible in installation. It should be installed near the heat-using equipment without laying foundation and without special staff.

5. Durable: Operate according to the regular process, and the service life can reach more than ten years.

6. The heat transfer medium of the heating system is the organic heat carrier-thermal oil. The medium is odorless, non-toxic, environmentally friendly, and non-corrosive to equipment. Long life, it is a "low pressure and high temperature" type of high-efficiency energy-saving heating equipment.

7. Can be customized: according to customer requirements design shape, single power from 12KW ~ 1000KW can be selected.


江苏鑫龙化纤机械有限公司


Heater oil heater Heater with heat-transfer oil
parameter
specification
Electric heating power
Thermal efficiency design pressure Working temperature ℃ Temperature accuracy Heater oil capacity Connection caliber Dimensions
Hot oil pump Total system power Kw Total equipment Expansion tank
L
Kw * 10 4 kcal / h L (mm) Width W (mm) High H (mm) Flow m 3 / h Head m power
Kw
XLDRY-9 9 0.8 ≥95 0.6 320 ± 1 15 32 1500 500 1290 6 28 1.5 11.5 200 100
XLDRY-18 18 1.5 ≥95 0.6 320 ± 1 twenty three 32 1400 500 1290 6 28 1.5 19.5 200 130
XLDRY-24 twenty four 2 ≥95 0.6 320 ± 1 28 40 1500 600 1290 10 28 2.2 27 350 150
XLDRY-36 36 3 ≥95 0.6 320 ± 1 46 40 1600 600 1300 10 28 2.2 39 350 200
XLDRY-48 48 4 ≥95 0.6 320 ± 1 48 50 1600 600 1350 12.5 30 3 53.5 350 230
XLDRY-60 60 5 ≥95 0.6 320 ± 1 52 50 1600 600 1400 16 32 4 65.5 350 230
XLDRY-72 72 6 ≥95 0.6 320 ± 1 60 50 1600 600 1600 16 32 4 77.5 550 280
XLDRY-90 90 7.5 ≥95 0.6 320 ± 1 68 50/65 1600 700 1600 25 35 5.5 97.5 550 280
XLDRY-120 120 10 ≥95 0.6 320 ± 1 105 65 1800 700 1750 30 48 7.5 127.5 750 300
XLDRY-150 150 12.5 ≥95 0.6 320 ± 1 195 80 2000 700 1750 45 40 11 157.5 750 300
XLDRY-180 180 15 ≥95 0.6 320 ± 1 230 80 2000 700 1750 45 40 11 191 1200 320
XLDRY-240 240 20 ≥95 0.6 320 ± 1 260 80 2000 700 1950 45 40 11 255 1200 350
XLDRY-300 300 25 ≥95 0.6 320 ± 1 290 80 2000 800 1850 50 50 15 315 1600 350
XLDRY-400 400 30 ≥95 0.6 320 ± 1 358 80 2250 900 1950 50 50 15 415 1750 450
XLDRY-500 500 40 ≥95 0.6 320 ± 1 510 80 2250 900 1950 50 50 15 515 1850 550
XLDRY-600 600 50 ≥95 0.6 320 ± 1 562 100 2250 900 1950 80 53 twenty two 615 1950 600
XLDRY-720 720 60 ≥95 0.6 320 ± 1 638 100 2250 900 1950 80 53 twenty two 715 2200 650
产品型号很多,以上为简单列出的几个,提供的数据仅供参考,具体规格可根据客户要求定制生产。 Note: There are many types of electric heating oil-conducting oil furnaces . The above are just a few listed. The data provided is for reference only. The specific specifications can be customized according to customer requirements.



江苏鑫龙化纤机械有限公司


江苏鑫龙化纤机械有限公司

Note: As our products are not customized, please be sure to confirm the parameters with customer service before ordering. We will design a set of solutions that are most suitable for you for free according to the requirements of each customer.


contact details:

Phone: 0515-88629188

Mobile: 18921898916

Fax: 0515-88602966

Q Q: 2016138246

Email: jsxinlongjt@163.com

Website: www.xinlongjt.com



Related tags:

ope体育 金蟾捕鱼_金蟾捕鱼电玩城_街机金蟾捕鱼-山南绕粕工艺品有限责任公司 传统足彩_竞彩网 传统足彩_竞彩网 捕鱼大作战---首页_欢迎您