，由加热机机组（加热管、高温油泵、过滤器）、膨胀槽、电气控制柜作为一整套设备与客户的用热设备进行连接，用户只仅需接入电源、介质的进出口管道及一些电气接口即可使用。 The electric heating oil-conducting oil furnace is connected by a heating machine unit (heating tube, high-temperature oil pump, filter), expansion tank, and electrical control cabinet as a complete set of equipment to the customer's heating equipment. The inlet and outlet pipes and some electrical interfaces can be used.
Its working principle: The electric heating oil furnace uses electricity as the energy source, inserts the heating element directly into the organic carrier (thermal oil) and directly adds it, using a high-temperature circulation pump to force the high-temperature heat-conducting oil to circulate in the liquid phase and transfer heat to the One or more heat-using equipment. After the heat-using equipment, it passes through the circulating pump again, returns to the heater, and then absorbs the heat and transfers it to the heat-using equipment. In this way, the continuous heat transfer is achieved to increase the temperature of the heated object. To meet the heating process requirements.
Thermal oil heater adopts digital display temperature controller to control temperature. It has over temperature alarm, low oil level alarm and over pressure alarm function. It is a kind of chemical, petroleum, machinery, printing and dyeing, food, shipbuilding, textile, film and other industries. Energy-efficient heating equipment.
1. Petroleum and chemical industry: polymerization, condensation, distillation, melting, dehydration, forced insulation, etc .;
2. Wood industry: plywood, fiberboard pressure forming, laminate heating, hot plate heating, oil press temperature control, wood drying, etc
3. Oil industry: fatty acid distillation, oil decomposition, concentration, esterification, vacuum odor and other reaction kettle temperature control, reaction kettle heating, etc.
4. Plastic and rubber industry: hot pressing, calendaring, extrusion, vulcanization, etc.
5. Synthetic fiber industry: polymerization, melting, spinning, stretching, drying, etc.
6. Textile printing and dyeing work: heat setting roller heating, drying room heating, heat capacity dyeing, etc.
7. Non-woven industry: non-woven fabrics, etc.
8. Feed industry: drying, etc.
9, paper industry: drying, corrugated paper processing, etc.
10. Building materials industry: gypsum board drying, asphalt heating, concrete component maintenance, etc .;
11. Machinery industry: painting, printing and drying;
12. Food industry: drying and heating.
1. With advanced and complete operation control and safety monitoring device, the heating process is fully controlled, easy to operate and easy to install.
2. Can get higher working temperature (≤340 ℃) under lower operating pressure (<0.5MPA). When the oil temperature is 300 ℃, the operating pressure is only 70% of the saturated steam pressure of water First, the thermal efficiency can be as high as 95% or more.
3. Stable heating and precise temperature adjustment, temperature control accuracy can reach ± 1 ℃. Non-steam boilers run, run, drip, leak and other heat losses, heat utilization rate of 95%, energy saving of about 50%.
4. The equipment is small in size and flexible in installation. It should be installed near the heat-using equipment without laying foundation and without special staff.
5. Durable: Operate according to the regular process, and the service life can reach more than ten years.
6. The heat transfer medium of the heating system is the organic heat carrier-thermal oil. The medium is odorless, non-toxic, environmentally friendly, and non-corrosive to equipment. Long life, it is a "low pressure and high temperature" type of high-efficiency energy-saving heating equipment.
7. Can be customized: according to customer requirements design shape, single power from 12KW ~ 1000KW can be selected.
Note: As our products are not customized, please be sure to confirm the parameters with customer service before ordering. We will design a set of solutions that are most suitable for you for free according to the requirements of each customer.
Q Q: 2016138246